• The drive axle is at the end of the power train

    The drive axle is at the end of the power train

    The drive axle is at the end of the power train and its basic functions are: ①Transmit the engine torque from the universal transmission to the driving wheels through the main reducer, differential, half shaft, etc., so as to reduce the speed and increase the torque; ②Change the torque transmission ... read more

    Nov 05,2021 News
  • What is the half-shaft machining process?

    What is the half-shaft machining process?

    Half shaft machining process flow 1. Select the material and cut, and determine the machining allowance at the same time, which is convenient for subsequent processing operations. 2. The semi-axle is forged on an air hammer and the cap is swung with a pendulum mill. 3. Shot peening the half shaft. 4... read more

    Oct 25,2021 News
  • Causes of damage to the rear axle shaft of a car

    Causes of damage to the rear axle shaft of a car

    The rear axle axle is the partial speed axle that drives the wheels of the car, and is located in the axis of the rear axle. The inner end of the half shaft spline shaft and the differential half shaft gear spline sleeve set, the outer end flange of the half shaft and the wheel are fastened and asse... read more

    Oct 22,2021 News
  • Types of semi-axle commonly used in cars

    Types of semi-axle commonly used in cars

    Types of semi-axle commonly used in cars   The semi-axle commonly used in modern automobiles has two types of full-floating and semi-floating according to the different supporting types. (There are also three types, namely full-floating, 3/4-floating, and semi-floating)   Full floating half shaft   ... read more

    Oct 15,2021 News
  • Ways to avoid broken axles of agricultural vehicles

    Ways to avoid broken axles of agricultural vehicles

    Ways to avoid broken axles of agricultural vehicles 1. Requirements for design and manufacturing units. The purchased shaft materials shall be inspected strictly in accordance with the inspection standards of the purchased materials, and waste materials shall not be allowed to flow into the producti... read more

    Oct 08,2021 News