The rear axle axle is the partial speed axle that drives the wheels of the car, and is located in the axis of the rear axle. The inner end of the half shaft spline shaft and the differential half shaft gear spline sleeve set, the outer end flange of the half shaft and the wheel are fastened and asse... read more
The automobile half shaft is the drive shaft. When the car is turning, the left and right wheels have different trajectory radii, so the distance they pass when turning is also different. The outer wheel has to pass a longer distance. If the power is transmitted to the same size wheel through a comp... read more
1. Select the material and cut, and determine the machining allowance at the same time, which is convenient for subsequent processing operations. 2. The semi-axle is forged with a tire mold on an air hammer, and the cap is swung with a pendulum mill. 3. Shot peening the half shaft. 4. Carry out the ... read more
Judging the fault based on the abnormal noise of the main reducer of the car is an important method to eliminate the car fault. To master this method, we must first clarify the general part of the car's abnormal noise. If the major part is wrong, it will inevitably take a lot of detours to find the ... read more
Main decelerator The main reducer is usually used to change the transmission direction, reduce the speed, increase the torque, and ensure sufficient thrust and appropriate speed. There are more types of main reducers: single-stage, double-stage, two-speed, wheel reducers, etc. 1. Single-stage final ... read more
