• Learn what a planetary gear is in one minute

    Learn what a planetary gear is in one minute

    Planetary gear mechanisms There are many types of planetary gear mechanisms. The simplest planetary gear mechanism is composed of a sun gear, a ring gear, a planet carrier and 4 planetary gears supported on the planet carrier, which is called a single planet. In the row, the sun gear, the ring gear ... read more

    Nov 25,2021 Industry News
  • Reasons for excessive vibration of gear reducer motor

    Reasons for excessive vibration of gear reducer motor

    After the geared motor is used for a certain period of time, various problems may occur. If the geared motor vibrates too much, we generally start from multiple aspects. The geared motor base vibration is too large, the motor is excessively worn, the transmission mechanism is out of adjustment and t... read more

    Nov 19,2021 Industry News
  • The function and structure of automobile half shaft (drive shaft)

    The function and structure of automobile half shaft (drive shaft)

    The automobile half shaft is also called the drive shaft, which connects the differential with the drive wheels. The semi-shaft is the shaft that transmits torque between the gearbox reducer and the drive wheel. There is a universal joint (U/JOINT) on the inner and outer ends of the shaft, which is ... read more

    Nov 12,2021 Industry News
  • The drive axle is at the end of the power train

    The drive axle is at the end of the power train

    The drive axle is at the end of the power train and its basic functions are: ①Transmit the engine torque from the universal transmission to the driving wheels through the main reducer, differential, half shaft, etc., so as to reduce the speed and increase the torque; ②Change the torque transmission ... read more

    Nov 05,2021 Industry News
  • What is the half-shaft machining process?

    What is the half-shaft machining process?

    Half shaft machining process flow 1. Select the material and cut, and determine the machining allowance at the same time, which is convenient for subsequent processing operations. 2. The semi-axle is forged on an air hammer and the cap is swung with a pendulum mill. 3. Shot peening the half shaft. 4... read more

    Oct 25,2021 Industry News